8 Best Plasma Cutters under $500 Easy to Use and Versatile!
A plasma cutter is an incredibly handy tool that allows you to cut through just about any metal with ease. These cutters are beloved by welders and mechanics, but they can also be handy for any metalworking jobs around the house.
We wanted to help you find the best plasma cutter under $500, so we set out to review eight of the most popular products on the market. The Lotos LTP5000D took our Editors Choice award thanks to its -inch cutting depth, included torch, and compact design. For being priced under $500, this cutter offers a lot of power and works very reliably.
Top 8 Plasma Cutters under $500 Review
In choosing the best plasma cutters, we looked at several different features. Cutting ability, which is the maximum depth of cut, was very important, as were the size and weight of the cutters. We also looked at voltage and duty cycle, since these reflect how and where youll be able to use your plasma cutter. Youll find all of our top eight picks in the table below, followed by detailed reviews. Continue reading for our buying guide, which explains everything you need to know about choosing the right plasma cutter under $500 for you.
This is a plasma cutter with a decent cutting ability, it also comes with a power supply and a torch included. No assembly required, so you can start working with it right away
This cutters cutting ability is not as impressive, but is still pretty decent. It has a drag torch technology and is very easy to use, while its all metal case and compact size make it easy to carry around
This compact plasma cutter comes with a handle for easy transportation, built-in overheating protection to make its usage safer, and LCD screen for monitoring every step
Its an inverted plasma cutter with a cutting ability of up to 1 inch and very clean cuts. While its quite compact, it requires heavy-duty 50-amp outlet for use and is designed for industrial work
This plasma cutter comes with a torch shield cup and can be easily wired to standard home outlet. Its an inverted technology machine which is also lightweight and rather small in size
This portable plasma cutter comes with welding shield and goggles. It works very quietly, which makes it perfect for those who dont like to much noise around while they craft
This is another plasma cutter that comes with all the useful accessorizes, such as a welding mask and goggles, included. Its also energy saving and has a pressure reducing valve
- Cutting ability: 1/2 inch
- Weight: 19.4 lbs.
- Dimensions: 15 x 6 x 12 inches
- Voltage: dual 110 V/220 V 50/60 Hz
- Duty cycle: 60% @ 50 A
More features: power supply and torch included; no assembly required; 1-year warranty; non-touch Pilot RC; compact
The Lotos LTP5000D won our Editors Choice as the best overall plasma cutter under $500. The -inch cutting ability is significant given how compact and lightweight the plasma cutter is. Importantly, Lotos -inch rating is actually the thickness it can cut cleanly this cutter is rated to sever metals up to inches thick. Youll need to have a 220-volt outlet in order to maximize your cutting depth, but the unit includes a power cable so this is relatively easy. Theres also very little assembly required since the cutter comes with everything you need to connect to your air compressors regulator.
One of the unique aspects of this plasma cutter is that it uses a non-touch Pilot RC tip. Since you dont have to touch the tip to the metal, your electrode and nozzle last far longer than with other cutters. However, this can be a slight downside as well, as users found that the cut is wide compared to other plasma cutters.
Longevity is an issue with this cutter, as with most plasma cutters under $500. Some users found that the machine worked reliably for years, while others had units that burned out after a handful of uses. Lotos offers a one-year warranty, but wont repair defective units after the warranty period.
- -inch clean cut ability
- 110/220-volt dual voltage
- Very little assembly
- Non-touch tip
- Relatively wide cuts
- Durability issues
- Cutting ability: 1/4 inch
- Weight: 21.5 lbs.
- Dimensions: 15.1 x 8.1 x 12 inches
- Voltage: 120 V
- Duty cycle: 35% @ 20 A
More features: easy to use; drag torch technology; all metal case; 12-month warranty; portable; includes a cutting torch; 20 A-15 A adapter; generator friendly
The Easy Weld from Forney is one of the best plasma cutters for home use. Forney thought of just about everything for this plasma cutter in terms of ease of use. It comes with a power source so you can easily wire it into any 120-volt home outlet, as well as a regulator so you can plug it into your air compressor and go. Even better, it includes an eight-foot long ground clamp, so grounding your plasma cutter is simple.
The included cutting torch is designed to be dragged directly across the metal surface. That uses up more consumables per cut, but it also allows you to use the sheet youre actively cutting for balance and precision. Cuts are narrow and its easy to get them straight.
The biggest downside to the Forney plasma cutter is that the duty cycle is extremely low just 35%. That means that after cutting for 3.5 minutes, you need to let the cutter rest for another 6.5 minutes before starting the next cut. Theres a temperature indicator on the unit to warn you when its close to overheating.
- Comes with ground clamp
- Very simple assembly
- Cutting torch is dragged across metal
- Temperature indicator to warn about overheating
- Very short duty cycle
- Drag technology uses a lot of consumables
- Only -inch cutting ability
- Cutting ability: 0.4 inch
- Weight: 37.5 lbs.
- Dimensions: 20.4 x 15.4 x 10 inches
- Voltage: 110 V/220 V
- Duty cycle: 60%
More features: inverted technical of switch power; compact; comes with a handle; built in over-heat protection
The Display4top Cut-50 plasma cutter is the perfect first plasma cutter for new metalworkers and shop owners. The cutter is surprisingly inexpensive for the features it offers. Most important, it can be connected to either a 110-volt or 220-volt power source and uses an inverted technical power switch to regulate the current. Theres also a screen so you can monitor everything thats going on in the unit while you cut.
Assembly can be a bit complicated everything you need to run the plasma cutter is provided, but it all needs to be installed before you can start making cuts. Helpfully, one of the pieces included is a ground clamp to ensure that you work safely.
The 60% duty cycle is relatively good, if not amazing. But, this cutter comes with built-in overheating protection, which is a huge plus. The cutter will automatically turn off if you approach the point of damaging your unit.
The only major downside to this cutter is that its heavy, weighing at more than 37 pounds. So, its not the ideal choice if you need to move your plasma cutter from jobsite to jobsite.
- Comes with inverted technical power switch
- Built-in overheating protection
- Relatively inexpensive
- LCD screen for monitoring current
- Assembly is complicated
- Very heavy
- Cutting ability: up to 1 inch
- Weight: 22.1 lbs.
- Dimensions: 18 x 8 x 14 inches
- Voltage: 110 V/230 V
- Duty cycle: 60% @ 50 A
More features: inverted; easy to maintain; designed for industrial work; torch design
This heavy-duty plasma cutter from CUT-50 has a cutting ability of up to one inch. Its one of the only plasma cutters under $500 that can handle cuts of this thickness, which is a good reason for industrial users to give it a closer look. The key is that this machine runs at 50 amps and can handle voltages up to 230 volts. Youll need an equally heavy-duty wiring and outlet to handle this plasma cutter, though, so make sure you have the infrastructure before committing.
Users found that cuts are extremely clean, but you will have to spend some time experimenting with current and pressure settings to get the exact cuts you want. For how impressive the cutting ability on this unit is, its not very large. The cutter is designed to be portable and is inverted for safety.
One issue to watch out for is that some CUT-50 units appear to have an issue with internal air leaks. This was noted by multiple users, who returned their units under the one-year warranty. However, this is an isolated issue, and most users were happy with the cutters performance.
- Cutting ability up to one inch
- Very clean cuts
- Inverted power
- Relatively portable
- Requires heavy-duty 50-amp outlet for use
- Some issues with internal air leaks
- Cutting ability: up to 0.3 inch
- Weight: 12.85 lbs.
- Dimensions: 16.8 x 10.6 x 8.4 inches
- Voltage: 110 V
- Duty cycle: 60% @ 30 A; 100% @ 25 A
More features: inverter technology; lightweight; suitable for cutting stainless steel; torch shield cup included
The HeroCut is one of the best small plasma cutters weve come across. Its extremely inexpensive, making it a good choice for metalworkers on a budget and first-time plasma cutter users alike. Better yet, its extremely portable this is by far the most lightweight plasma cutter we reviewed. The HeroCut also uses inverter technology inside to maximize your safety.
The cutting ability of the HeroCut is somewhat limited, at just 0.3 inches. Some users found that it was significantly weaker, but this was a relatively rare complaint. The advantage to the thin cutting ability is that the cutter only needs to be wired to a standard 110-volt outlet to achieve a 0.3-inch depth. Even then, its able to pull up to 30 amps of current and can sustain a 60% duty cycle, which is on par with much larger plasma cutters.
The HeroCut comes with everything you need for assembly, although users recommended adding a quick-disconnect fitting to make connecting to the air compressor easier. Youll also notice that, unlike many competing plasma cutters, it doesnt come with an LCD screen. But, this is mostly unnecessary given that the only control available is the current dial.
- Extremely small and lightweight
- Inverter technology
- Very inexpensive
- Can be wired to standard home outlet
- Too weak for many thick metal sheets
- No LCD screen
- Needs a quick-disconnect fitting
- Cutting ability: up to 0.5 inch
- Weight: 23 lbs.
- Dimensions: 19.3 x 13.4 x 10.8 inches
- Voltage: 110 V/220 V
- Duty cycle: not specified
More features: welding face mask and goggles included; lightweight; quiet
The VIVOHOME plasma cutter is another rendition of the inverted tool, with a few useful tweaks. To start, its adaptable. The unit can be wired to either 110-volt or 220-volt power, and has a switch and dial that can be used in concert to dial in your output current. At full power, the unit has a cutting ability of up to half an inch. However, keep in mind that the duty cycle isnt rated and theres no temperature indicator light. So, youll need to be very careful about not overworking the unit.
The cutter comes with almost everything you need to start working, including a welding face mask and goggles for safety. However, there is one necessary component missing theres no tubing to connect from the air input to your air compressor. Youll need to buy this separately, although its very inexpensive. The VIVHOME cutter is also fairly portable since its only 23 pounds. It doesnt come with a handle on top, but this is relatively easy to add.
Importantly, this cutter can be connected to a CNC machine. The instruction manual covers how to do this, but users note that youll probably need to consult additional sources for the installation.
- Can be installed on CNC machine
- Cutting ability up to 0.5 inches
- Comes with welding shield and goggles
- Doesnt come with air tubing
- No handle for carrying
- Duty cycle is not rated
- Cutting ability: up to 0.5 inch
- Weight: 24.4 lbs.
- Dimensions: 18.5 x 13.5 x 11 inches
- Voltage: 110 V/220 V
- Duty cycle: 60%
More features: energy saving; has a handle; pressure reducing valve included; goggles and welding face mask comes with it
This Chinese-made plasma cutter from ZENY is somewhat hit or miss. Its extremely affordable for what youre getting, which is why so many metalworkers are willing to stand behind it. But, users consistently warn about faulty diodes and components inside. Theres no warranty, so make sure you buy from a company with a strong return policy and use the plasma cutter frequently at first to make sure you dont have a faulty unit.
That said, when this plasma cutter works, theres a lot to like. It can be wired to either a 110-volt or 220-volt outlet to cut metals up to 0.5 inches thick. The current is extremely simple to control thanks to a switch and knob system, and you can monitor your current on the included LCD screen. The cutter also comes with everything you need to install it in your shop, including a pressure reducing valve for large air compressors.
The plasma cutter is a little bit on the heavy side, but its still very portable. Theres a built-in handle and the machine is relatively compact, so its simple to move around your workshop as needed.
- Relatively inexpensive
- Cutting ability up to 0.5 inches
- Included LCD screen
- Simple current adjustments
- Quality is very hit or miss
- No warranty from manufacturer
- Cutting ability: up to 0.78 inch
- Weight: 19.15 lbs.
- Dimensions: 17.5 x 13.7 x 10.7 inches
- Voltage: 110 V/220 V
- Duty cycle: 85%
More features: LCD display; no external conversion plug required
This plasma cutter from CORAL is a great choice for home users. It comes with just about everything you need to get started cutting metal, and offers a massive cutting ability up to 0.78 inches. Users found that you can get surprisingly deep cuts just by connecting this unit to a standard 110-volt outlet, although youll reap the full potential by wiring to a 220-volt outlet. Whats particularly impressive about this plasma cutter is that it has an 85% duty cycle, meaning you almost never have to stop working.
On the whole, users were extremely happy with the construction of this plasma cutter. They found that it worked reliably, and its one of the only cutters under $500 that comes with a three-year warranty. The pressure regulator can fail after a few months of use, but this is easy and inexpensive to replace.
The main downside to this plasma cutter is that it doesnt have a true pilot arc plasma tip. That means cuts are a little bit messier and wider than what youd get with a more professional plasma cutter. But, for rough cuts, this plasma cutter has some of the most inexpensive consumables of any unit that we looked at.
- Cutting ability up to 0.78 inches
- Three-year warranty
- Very inexpensive consumables
- 85% duty cycle for near-continuous use
- Pressure regulator is prone to failure
- Not a true pilot arc cutter
Why do you need a plasma cutter?
Plasma cutters are immensely useful tools for anyone who fabricates metal parts or welds. These tools allow you to quickly, easily, and accurately cut through metal. Thats an essential task whether youre working on building a new machine out of metal, working on adding onto an existing metal component, or creating notches or fittings that you can use to attach two materials together. Ultimately, a plasma cutter is a lot like a more traditional oxy-fuel welding torch. But, there are a few significant advantages to opting for a plasma cutter.
The first is that plasma is able to cut through non-ferrous metals. That includes aluminum, stainless steel, and cast iron, all of which are becoming more commonly used in parts and more available as raw sheets. You cant cut through these metals safely with an oxy-fuel torch.
The second major advantage to using a plasma cutter for your metalwork is that its faster and easier to use than an oxy-fuel torch. The metal youre going to cut through doesnt need to be pre-heated when using plasma, which saves time and makes the process a bit safer. In addition, plasma cutters can cut through stacks of thin metal sheets something that oxy-fuel torches struggle with. Plasma also offers smoother cuts with less kerf and wont distort most thin metal sheets, giving you better results than you could otherwise achieve.
The only real downside to using a plasma cutter is that most of these tools are limited to cutting through metal sheets of one inch or less. Once you have a thicker sheet, youll probably need to switch to an oxy-fuel torch to make your cuts.
Features to consider before you buy a plasma cutter under $500
While all of the plasma cutters available today operate using the same basic principle, they vary widely in capabilities and features. These differences can make a huge difference in whether a particular plasma cutter is right for the projects you have in mind. So, lets take a closer look at the features you need to think about when choosing a plasma cutter under $500.
The cutting ability of a plasma cutter is a measure of the thickness of metal that it can cut through. So, with a plasma cutter like our Editors Choice model from Lotos that has a 0.5-inch cutting ability, youd be able to cut through metal sheeting or parts up to 0.5 inches thick. However, you should leave some leeway in matching your plasma cutter to the thickness of the metal you want to cut. If you use the Lotos cutter on a metal piece thats truly 0.5 inches thick, it will leave an unclean kerf at the base of the cut.
Its also worth noting that almost no plasma cutter on the market today and certainly no model under $500 is capable of cutting metal more than one inch thick. The CUT-50 Plasma Cutter is the only model under $500 that boasts a one-inch cutting ability.
Plasma cutters are designed to be portable, so weight matters. Most of the units we looked at weigh around 20 pounds, so theres not much of an issue with carrying them around. However, some units like the Display4top CUT-50 cutter are significantly heavier and are best suited for home or workshop use. Others, like the ultralight HeroCut Plasma Cutter, are better suited for transport between multiple jobsites.
Like weight, the size of your plasma cutter can affect its portability.
Voltage is very important to consider when choosing a plasma cutter, since it affects where and how youll be able to use it. Most of the plasma cutters that we looked at can run on either 120-volt or 240-volt power. However, units like the Forney Easy Weld 251 20 P can only run on 120-volt power.
The downside to this voltage is that your power is limited most cutters cant exceed a 0.5-inch cutting ability when running on 120-volt power. 240-volt power is what most shop outlets and some heavy-duty generators deliver. This voltage is required to get the most power out of your plasma cutter, which youll need for metal sheets thicker than 0.5 inches.
Duty cycle is often overlooked, but extremely important. It represents the percentage of time, out of 10 minutes, that you can use your plasma cutter without overheating and damaging the system. So, for example, the CORAL Plasma Cutter has an 85% duty cycle. That means it can safely run for 85% of 10 minutes, or 8.5 minutes, at a time. If you plan to use your plasma cutter for larger jobs with more continuous cuts, a higher duty cycle is essential. Some cheap plasma cutters have relatively short duty cycles the Forney Easy Weld, for example, offers just 3.5 minutes of use out of every 10 minutes. So, a cutter like that is best suited for small tasks.
Most plasma cutters do need a small amount of installation work. To start, some 30-amp cutters need to be wired into your fuse box or to an electrical plug they do not come with a standard outlet plug. In addition, youll need to connect your cutter to an air compressor unless it has a built-in air compressor. Youll also need to install the consumable electrode and nozzle before starting work.
One of the biggest dangers when using a plasma cutter is electrocution. These are very powerful tools that step up current. You should always wear rubber gloves in addition to welding gloves to prevent static shock, as well as stand on a rubber mat to ground yourself when working. On top of that, the plasma cutter itself should always be grounded during use. Youll also need to wear protective goggles, since the arc rays given off by the plasma can be damaging to your eyes.
Plasma cutters under $500 dont differ from more expensive systems in any obvious ways. The biggest difference is reliability cheap plasma cutters tend to burn out sooner than their more expensive counterparts. In general, the warranty on plasma cutters under $500 is limited to one year, whereas three-year warranties are common on more expensive plasma cutters.
The Lotos LTP5000D easily won our Editors Choice award as the best plasma cutter under $500. Its 0.5-inch clean cuts are very impressive and the non-touch tip is a huge plus for durability and ease of use. On top of that, the LTP5000D is not all that pricey for what youre getting. The Forney Easy Weld is a Premium Choice for metalworkers who want extremely clean, but shallow cuts. Its not the most powerful plasma cutter, but its very portable and makes the process simple. Finally, budget hunters will love the HeroCut Plasma Cutter. This cutter is small but mighty, with a cutting ability of up to 0.3 inches and a 60% duty cycle. It doesnt have features like an LCD screen, but its one of the best plasma cutters under $500 if you just want something that can get the job done reliably.
The post 8 Best Plasma Cutters under $500 Easy to Use and Versatile! appeared first on WisePick.org.